Overview And Operation Of Unit; Overview Of Unit - Weidmuller Power Monitor Handbuch

Overview and operation of unit

5. Overview and operation of unit
5.1

Overview of unit

1 Item indicator
2 Auxiliary indicator
3 TX/RX indicator
4 Load ratio indicator
5 Lock indicator
6 Unit indicator
7 Measurement value
8 Keys
9 Terminal block A
10 Terminal block B
11 USB port
12 Mounting clip
*1 Auxiliary indicator [LEAD][LAG] displays the phase difference between voltage and current.
When there is a current phase delay to voltage phase, [LAG] is displayed.
When current phase leads to voltage phase, [LEAD] is indicated.
When power factor is '1', '0' and '-1', neither [LEAD] nor [LAG] is displayed.
14
Measuring mode
Setting mode
Measuring mode
Measuring mode
Measuring mode
Measuring mode
Measuring mode
Measuring mode
Setting mode
Are used to operate the unit
USB communication port
Are used for panel mounting (screws:M4x10mm)
Indicates the measuring item
Indicates the setting item
Indicates the power condition *
Flashes during communication
Indicate the ratio of load (current) for the rating
Is lit when locked mode
Indicates the measuring unit
Indicates the measuring value
Indicates the setting value
1
1435710000/01/05.13