Password Setting - Weidmuller Power Monitor Handbuch

Settings
7.4.4

Password setting

Password setting
You can set a password for changing the settings.
The password must be entered before changing the setting mode.
We recommend that you set a password to avoid changes from being made inadvertently.
Confirm: [YES]
Do not confirm: [NO]
1435710000/01/05.13
PASS
Press <SET> and [0] on the left will flash.
Set password using <ITEM/∆>, <SHIFT/∇>.
Increase
Move the digit entered to the right.
Set from left to right. The digit will flash.
[Set range] 0000 to 9999 (initial: 0000)
Set a 4-digit password and press <SET>
The confirmation window will then be displayed.
[Set range] YES, NO (initial: NO)
41