oneConcept 10029903 Handbuch Seite 18

Function
Press 2x
(Natto)
Function
Press 3x
(Kimchi)
Function
Press 4x
(Rice Wine)
Function
Press 5x
(Wine)
[Start/Cancel] key:
Hints on the Function Keys
• Press the key [+] to increase cyclically, which means to return to the minimum time after
exceeding the maximum time. Press the key [-] to decrease cyclically, which means to
return to the maximum time after exceeding the minimum time;
• Confirm the setting with the START/CANCEL button.
Changing the Temperature Setting
• Press the [+ -] keys simultaneously in the state of function setting to enter the state
of temperature setting, and then press the [+] or [-] key to increase or decrease the
temperature.
• After setting the function, press the key once to enter the standby mode for the function.
• If the key is pressed once in a work mode, the current function is canceled to enter the
shutdown mode.
Checking the Functional Status
In a work mode, press the function key to check the set function, and press the [+ -] keys
simultaneously to check the set temperature;
18
The time on the screen flashes, if it is not set within 8s, it backs to the
F2 standby mode. The default time is 18h. How to set: At this time, press
the key [+] to increase 1h each time till 36h;
The time on the screen flashes, if it is not set within 8s, it backs to the
F3 standby mode. The default time is 28h. How to set: At this time, press
the key [+] to increase 1h each time till 36h;
The time on the screen flashes, if it is not set within 8s, it backs to the
F4 standby mode. The default time is 36h. How to set: At this time, press
the key [+] to increase 1h each time till 48h;
The time on the screen flashes, if it is not set within 8s, it backs to the
F5 standby mode. The default time is 7d. How to set: At this time, press
the key [+] to increase 1d (24h) each time till 9d;