Technical Features; Machine Description; Parts Detail; Technical Data - Minipack-Torre Mailbag Digit Installations, Gebrauchs Und Wartungsanweisungen

Chapter 2. TECHNICAL FEATURES
2.1

MACHINE DESCRIPTION

1. Control panel
2. Front door
3. Magazine container
4. Wheel with brake
5. Wheel
6. Unroller
7. Power connection
2.1.1. PARTS DETAILS
Feed assembly (Fig. 4)
1. Photocell
2. Reflector
3. Feed roller
4. Feed roller
5. Gearmotor
6. Cogged belt
2.2

TECHNICAL DATA

Machine net weight: 130Kg
Machine overall dimension
Width: 600 mm
Machine dimensions when packaged
Width: 740 mm
Environmental conditions
Temperature: 0 ÷ 40°C
Electrical system
Voltage: see data on plate
Frequency: see data on plate
Total power installed: see data on plate
Individual engine power: see electrical diagram
Connection system: monophase + neutral + grounding
Protection level: IP20
Data relative to the product to be packed/wrapped
Width: Min.160 - Max.250 mm
Length: Min.100 - Max.360 mm
Thickness: Up to 15 mm
Production and use restrictions
Production: 20 pieces/minute
Usable films: Transparent or printed polyethyl (version with double photocell). Maximum thickness 30 micron
CAUTION!
The machine was NOT assembled with anti-blast measures, it is assembled with standard features.
It is therefore forbidden to install and operate the machine in environment with risk of blast (explosion).
Do not exceed values or manufacturing limits described above.
Any other use not provided is not compliant with the technical specifications
2.3

VIBRATIONS, NOISE AND LIGHTNING

Vibrations
The machine does not send any vibration that can jeopardize stability and precision of the equipmentplaced nearby.
It is therefore compliant with standard ISO-2631
Noise
The machine produces an acoustic pressure level (sound emission) that is lower than 70 dbA
Lightning
The work area where the machine is installed must be sufficiently illuminated with natural light and must be equipped
with devices that allow artificial light enough for preserving operator's safety and health. The minimum lighting required to
guarantee a correct reading of symbols and marks is included between 300 and 500 lux.
2.4

DESTINATION AND USAGE ENVIRONMENT

The machine shall operate exclusively within closed environment, where danger of explosion or fire is not present.
The area surrounding the machine shall remain as much as possible dry and free from bulk.
8. Forming box
9. 1° guide
10. Cross welding bar
11. 2° guide
12. Longitudinal welding bar
13. Belt conveyor (optional device)
Unroll assembly (Fig. 5)
1. Gearmotor
2. Cogged belt
3. Pulley
4. Engine driven roller
5. Horizontally pivoted roller
6. Idle roller
Length: 840 mm
Length: 940 mm
Relative humidity (not condensed): 90%
11
Height: 1050 mm
Heigh: 1230 mm
and therefore is considered "NOT ACCEPTED".
GB