Steam Dispensing - Faema E71 E Gebrauch Und Installation

18. Steam dispensing

The steam lever offers some special features that make it extremely useful.
"purge" function
One of the most interesting features is the "Purge" function,
which makes it possible to eliminate any condensation
that may have formed when a medium/long period of time
passes between steam dispensing.
To activate the "Purge" function, push the steam lever
upwards and keep it in this position for several seconds.
When the lever is released, it automatically returns to the
starting position.
Modularity
Another valuable function offered by the steam lever is
modular dispensing.
When the steam lever is pushed towards the cup tray, there
are 2 different positions for the lever, offering two different
levels of steam intensity:
- position V1 (half way): 50% strength, to heat medium/
small amounts of beverages;
- position V2 (fully up): 100% strength for large amounts
of beverages.
Scalding hazard!
insulating devices (a) to move the water and
steam wands.
Completely immerse the (12) steam nozzle into the container
with the liquid to be heated and push the steam control
lever (2) towards the cup tray in the appropriate position.
Wait until the liquid has reached the desired temperature,
then lower the steam command lever to stop the issue of
steam.
Cleaning of steam dispensing pipes
at the conclusion of each steam dispensing phase:
- Using a clean sponge, wash with hot water removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully activate steam dispensing at least once.
Use the appropriate
17 EN
"Purge"
50%
a
2
12
100%