Customer Programming - Faema E71 E Gebrauch Und Installation

CUSToMER pRoGRaMMInG

20. Data flow chart
Access the programming menu by pressing the icon
1
Press the icon .
aUToMaTIC SWITCh oFF / SWITCh
on
The machine can be set to switch off and
switch on at programmed times.
note. When the machine is working in
the automatic on/off function do not
use the general switch (1) to switch
off the machine. If this happens, the
machine will not be able to switch on
again automatically.
FoRCED SWITCh on
Press the key to force the machine
on again.
note. Forcing the machine on does
not change the programmed
on/off times.
note. at this point the machine will
remain on until the next switch
off time is reached.
To immediately return the machine to
"off" as originally programmed, switch it
off and on again using the general on-off
switch (1).
Return to the previous menu or exit the programming
.
menu by pressing the icon
Service time menu
2a
Access the service hours menu by
pressing the icon .
2b
Press the icon to set the time.
2c
Press the icon to set the date.
19 EN
.
These parameters can be configured:
USE - timed switch-on/switch-off:
YES, NO, Eco (during the switch-off
phase, the machine resistance is not
completely disabled and allows the
boiler pressure to remain at 0.2 bar).
on - (switch-on time);
oFF - (switch-off time);
CloSED - (day of closure).
These parameters can be configured:
hoUR, MInUTES, STYlE - (24:00 or
AM/PM).
These parameters can be configured:
DaY, MonTh, YEaR.