Faema E71 E Gebrauch Und Installation Seite 66

Water
1
Press the icon .
1
Place a container suitable for the
amount you wish to fill beneath the hot-
water outlet and press the
4
Press the icon to exit the SELF-
LEARNING phase.
2
Press the water key. These parameters can be configured:
SET... - to set the dispensing time;
% - to set the water temperature.
NOTE. -
modified.
- the TEST phase of the water keys is exactly the same as that for the
coffee keys
Press the
Water dose programming using the "self-learning" function
2
The sound of the buzzer and the red
corner in the top left of the
icon. icon show that the SELF-LEARNING
function is active.
5
The sound of the buzzer and the red
corner in the top left of the
will disappear.
the red corner in the top left of the icon shows that the key is being
icon to confirm the information entered.
icon
22 EN
3
Press key to be programmed. When
the desired level is reached in the
container press the key again.
Continue with any additional program-
ming of the keys.
6
The dispensing time and temperature
of the water added will be displayed
which can be corrected manually using
the buttons .
Afterwards, confirm the values by
pressing the icon.