Steam Dispensing - Faema E71 Gebrauch Und Installation

18. Steam dispensing

Dispensing with the Autosteam selector (13) (where contemplated)
1
Insert the steam nozzle (9a) into a
suitable container, making sure the
bulb is completely immersed in the
milk.
3
COLD TOUCH (only in some product con gurations)
The new Autosteam Cold Touch (9a) improves the ease
of use of the steam wand, thanks to an insulating and
non-stick coating that keeps it cold before, during and
after dispensing the steam, thus making it easy to handle
and clean.
2
13
9a
AS1
Select the type of milk you prefer (heated or frothed) by changing the position
of the "steam selector lever" (13) (AS1 ÷ AS4):
• hot milk (lever position AS1);
• frothed milk (minimum frothing level, lever position AS2);
• frothed milk (medium frothing level, lever position AS3);
• frothed milk (maximum frothing level, lever position AS4).
The type of frothing is displayed on the
touch screen.
Press the icon
dispensing. Once the set temperature
is reached, the steam will stop
automatically.
19 EN
AS3
AS2
to start The distribution may be interrupted at
any time by pressing the icon
AS4
.
9a