Simultaneous Washing - Faema E71 E Gebrauch Und Installation

simuLtaneous WashinG

Procedure to follow at the end of the working day on all groups or when signalled by the machine.
1
EXECUTE GRoUp ...
WaSh
The simultaneous washing mode
appears on the display.
4
Insert the rubber disk into the filter
holder with its filter.
7
EXECUTE GRoUp ...
WaSh
Press the icon .
10
REMoVE GRoUp FIlTER
holDER
push
At the end of wash cycle, the message
"REMOVE GROUP FILTER hOLDER"
will appear.
12
GR ... RInSE
085%
The message "GR ... RINSE" will
appear. alternating with the percentage
of completion.
2
Remove the filter holder from the
coffee group.
5
Pour in a packet or dosing cupful of
detergent powder.
8
InSERT FIlTER holDER
GRoUp ...
push
Press the icon .
11
Remove the filter holders and press
the icon .
13
The washing cycle is complete after
the rinsing phase.
29 EN
3
Using a brush, clean the cover gasket.
6
Hook all the filter holders to the groups.
9
GR ... WaSh
015%
The wash cycle
will start and the
" G R ... W A S h "
m e s s a g e s
w i l l a p p e a r
alternating with
the percentage of
completion.
The indication with the progress
bar will appear on the unit display.
Do not remove the filter holder during
coffee dispensing.