Electrical Connection; Check Rotation Direction - Beissbarth MS 63 Originalbetriebsanleitung

en 30 | MS 63 | Initial commissioning
4.4

Electrical connection

1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the MS 63 according to specific national rules.
|
1 695 106 288 2013-10-30
4.5

Check rotation direction

!
For a correct functioning of MS 63 it is extremely
important that, when the locking flange pedal shown
in Fig. 2 (1) is pressed, the locking flange (Fig. 2)
rotates clockwise.
1
Fig. 2: Check rotation direction.
Beissbarth GmbH