Herunterladen Inhalt Inhalt Diese Seite drucken

Selecting The Date And Time (Only C Mod.); Useful Tips; Maintenance; Rinse Aid And Detergent - Fagor evo series Installations-, Gebrauchs- Und Wartungsanleitung

Vorschau ausblenden Andere Handbücher für evo series:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 49
EN
5.1.18 Selecting the date and time

Selecting the date and time (only C MOD.)

The date and time are displayed in the following format.
The date and time are displayed in the following format. D
the date and the time, proceed as follows:
the date and the time, proceed as follows:
With the machine switched off, press
With the machine switched off, press MENU for 5 seconds.
Scroll through the
Scroll through the CONFIGURATION menu until reaching the DATE/TIME
then press the MENU
Press the START button to go to the
The value D
Use the MENU button to set the required value. (This is always ascending).
Press START to confirm the value, and go to the next setting (
Enter all the values. When the last value (
Enter all the values. When the last value (m
complete.
It is also possible to confirm the setting without reaching the last value, by pressing the
It is also possible to confirm the setting without reaching the last value, by pressing the
It is also possible to confirm the setting without reaching the last value, by pressing the
START button for 3 seconds.

5.2 Useful tips

Read the useful tips listed below carefully to allow you to get the most out of your dishwasher.
ead the useful tips listed below carefully to allow you to get the most out of your dishwasher.
ead the useful tips listed below carefully to allow you to get the most out of your dishwasher.

5.2.1 Maintenance

Always clean the machine correctly to prolong the service life of the machine.
ays clean the machine correctly to prolong the service life of the machine.
ays clean the machine correctly to prolong the service life of the machine.
Remove any waste from the machine at the end of each day.
Remove any waste from the machine at the end of each day.
Do not use abrasive, corrosive or acid products, chlorine
Do not use abrasive, corrosive or acid products, chlorine-based detergents, solvents or
petrol derivatives to clean the
petrol derivatives to clean the machine.
Do not use pressurised water to clean the machine.
Do not use pressurised water to clean the machine.
Only wash tableware, glassware or kitchenware that has been used for human food.
Only wash tableware, glassware or kitchenware that has been used for human food.
Only wash tableware, glassware or kitchenware that has been used for human food.
Check that the wash distributors rotate correctly every day.
Check that the wash distributors rotate correctly every day.
Check the salt, rinse aid and detergent levels at the start of each day.
Check the salt, rinse aid and detergent levels at the
Call the technical service twice a year to have the machine serviced:
Call the technical service twice a year to have the machine serviced:
Call the technical service twice a year to have the machine serviced:
If the power cable is damaged, it must be replaced by the manufacturer, after
If the power cable is damaged, it must be replaced by the manufacturer, after
If the power cable is damaged, it must be replaced by the manufacturer, after-sales service or
authorised technical personnel in order to prevent risks.
authorised technical personnel in order to prevent risks.

5.2.2 Rinse aid and detergent

If you change the rinse aid or detergent, the settings should be adjusted accordingly. This
change the rinse aid or detergent, the settings should be adjusted accordingly. This
change the rinse aid or detergent, the settings should be adjusted accordingly. This
adjustment must be carried out by qualified personnel. Only use detergents suitable for industrial
adjustment must be carried out by qualified personnel. Only use detergents suitable for industrial
adjustment must be carried out by qualified personnel. Only use detergents suitable for industrial
dishwashers. Do not use foam
dishwashers. Do not use foam-producing detergents. Detergents designed f
not be used under any circumstances.
not be used under any circumstances.
When handling chemical substances, the safety instructions must be observed. Use
When handling chemical substances, the safety instructions must be observed. Use
When handling chemical substances, the safety instructions must be observed. Use
suitable protective clothing, gloves and safety goggles when handling chemical
suitable protective clothing, gloves and safety goggles when handling chemical
suitable protective clothing, gloves and safety goggles when handling chemical
substances. Do not mix different d

5.2.3 Hygiene regulations

Do not touch clean dishes with dirty or greasy hands.
Do not touch clean dishes with dirty or greasy hands.
Use clean sterilised cloths to thoroughly dry the dishes.
Use clean sterilised cloths to thoroughly dry the dishes.
We recommend you wait until the machine reaches the correct wash temperature as this will
We recommend you wait until the machine reaches the correct wash temperature as this will
We recommend you wait until the machine reaches the correct wash temperature as this will
ensure a more thorough disinfection and wash.
Drain the wash tub at least twice a day or every 40/50 wash cycles.
Drain the wash tub at least twice a day or every 40/50 wash cycles.

5.2.4 Optimum results

To obtain optimum dishwashing results, the manufacturer recommends you proceed as follows:
To obtain optimum dishwashing results, the manufacturer recommends you proceed as follows:
To obtain optimum dishwashing results, the manufacturer recommends you proceed as follows:
Wash the dishes when the machine is ready.
Wash the dishes when the machine is ready.
Always ensure the different dispensers are correctly adjusted.
Keep the dishwasher thoroughly clean.
Keep the dishwasher thoroughly clean.
44
MENU button.
button to go to the DATE/TIME menu.
starts to flash immediately.
starts to flash immediately.
1
button to set the required value. (This is always ascending).
button to set the required value. (This is always ascending).
to confirm the value, and go to the next setting (D
button for 3 seconds.
Cleaning of water filter.
Cleaning of water filter.
o
Cleaning of limescale on the resistors.
Cleaning of limescale on the resistors.
o
Inspection of the condition of the seals.
Inspection of the condition of the seals.
o
Inspection of the condition of the parts.
Inspection of the condition of the parts.
o
Adjustment of the
Adjustment of the dispensers.
o
Tightening of the electrical connections on the terminals.
Tightening of the electrical connections on the terminals.
o
producing detergents. Detergents designed for domestic use should
Do not mix different detergents.
thorough disinfection and wash.
ensure the different dispensers are correctly adjusted.
D
/M
M
/Y
Y
H
H
H
/m
1
2
1
2
1
2
1
2
DATE/TIME function, and
).
2
) has been entered, the programming is
) has been entered, the programming is
2
based detergents, solvents or
start of each day.
m
. To programme
1
2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis