Saving Wheel Data Measurements; Saving Data; Retrieving Wheel Data - Nussbaum BM 11 Bedienungsanleitung

8

Saving wheel data measurements

Any wheel data and respective program can be sa-
ved using a special program and can be recalled later
when required.
A total of 20 positions are available numbered from 0 to
19 on the program.
8.1

Saving data

The saving mode can be entered using key 16. A posi-
tion can be chosen using the keys +/- (4/5). Once the
position for saving the information has been decided,
press key 12 (enter) to save the data.
Display:
8.2

Retrieving wheel data

Wheel data can be retrieved by pressing key 17. Choose
the desired position by using the keys +/- (4/5). Once
the position has been found, select by pressing key 12
(Enter) and the wheel data is transferred from the me-
mory to the display.
Saved wheel data cannot be deleted, but only over-
written by new data.
68
till
03.07.2013 1 689 979 917N