Program E - Alu 3; Program F - Alu 4 - Nussbaum BM 11 Bedienungsanleitung

5.3.2.5 Program E - ALU 3

For alloy rims with clip on wheel weights on the rim edge
and adhesive wheel weights on the inner side of the rim
1
3
BM 10-2 / 11 / 20-2 / 30-2 / 40-2 / 50-2
The distance between machine and rim is automatical-
ly detected.
Extend the outside gauge to the position 1 and hold in
place until an audible signal is heard.
Move the inside gauge directly to position 3 and hold
until another audible signal is heard.
Return the gauge to the home position.
Another signal indicates that it is in the home position.
BM 10-2
Enter rim diameter manually via the +/- button.
!
The actual value is automatically stored when ano-
ther button is pressed or the wheel guard is closed to
start the measuring run.
BM 20-2, 30-2, 40-2, 50-2
The rim diameter is automatically detected together
with the distance by the inner gauge arm.
!
The rim width is not of meaning in this balancing pro-
gram
54

5.3.2.6 Program F - ALU 4

For alloy and steel rims with a clip on weight on the left
rim edge and an adhesive weight below the right rim
edge
1
4
BM 10-2 / 11 / 20-2 / 30-2
The distance between machine and rim is automatical-
ly detected.
Extend the outside gauge to the position 1 and hold in
place until an audible signal is heard.
Replace the gauge back into its home position.
A further audible signal is heard for the con rmation that
the arm has reached ist home position.
BM 10-2
Enter rim diameter manually via the +/- button.
!
The actual value is automatically stored when ano-
ther button is pressed or the wheel guard is closed to
start the measuring run.
BM 11 / 20-2 / 30-2 / 40-2 / 50-2
The rim diameter is automatically detected together
with the distance by the inner gauge arm.
BM 10-2 / 11 / 20-2 / 30-2
Enter the value manually via the +/- buttons.
BM 40-2 / 50-2
Move the inside gauge directly to position 1 and hold
until audible signal is heard.
Return the gauge to the home position.
Extend the outside gauge to the position 4 and hold in
place until an audible signal is heard.
Return the gauge to the home position. Another signal
indicates that it is in the home position.
03.07.2013 1 689 979 917N