Filling Instructions - Coltene BioSonic UC150 Benutzerhandbuch

6. Filling Instructions

• Ensure that the drain handle
Fill the unit with warm water to the fill line indicator
filled up to the minimum line and does not exceed the maximum line while using accessories
like beakers or baskets.
• Pour the required amount of ultrasonic cleaning solution (eg. BioSonic General Purpose UC30,
BioSonic Enzymatic Ultrasonic Cleaner UC32) and water into the tank. Note that some solutions
require the use of a beaker.
• Change the solution in the tank daily or sooner if it appears soiled or discolored. When beakers
are used, change the solution in the beaker after each use.
• Drain unit by fully rotating the drain handle clockwise to the "Open" position and allow the
solution to empty into sink or waste system. Rinse tank and fully rotate the drain handle
counter-clockwise to the "Closed" position. Never drain tank by manually discarding solution as
this may cause the unit to stop working properly.
NOTE: Never operate the unit without solution. Operating a dry tank will void the warranty.
Do not place objects directly on bottom of tank. Always use a cassette basket or beakers.
7. Degassing
Degassing the solution eliminates large air bubbles that interfere with the cleaning process and is
necessary each time new solution is added to the tank.
NOTE: Be careful not to introduce unwanted gases into the liquid. Do not pump/pour the
00 vector graphics: logo and buttons
solution too quickly into the bath, insert/remove the product being cleaned into the bath too
rapidly, or move product while in the bath. Doing so will re-introduce gas into the solution and
01-logo-loading
require a longer degas cycle.
02-logo-information
00 vector graphics: single-icons and screen buttons
• PRESS THE DEGAS icon on
04-A-button-program-light
04-B-button-program-light-feedback
• Select the type of solution to log solution used or degas only and press
05-A-button-program-regular
30-settings
05-B-button-program-regular-feedback
• The BioSonic UC150 will begin to cycle on and off during the degassing process. The timer will
31-temperature-large
06-A-button-program-heavy
count down from five minutes.
06-B-button-program-heavy-feedback
32-temperature-medium
• DEGAS COMPLETE! Once the timer reaches zero, the words "Degas Complete" will be displayed.
07-A-button-program-my
07-B-button-program-my-feedback
33-temperature-small
Your solution is now ready for use. Press
11-A-button-settings
11-B-button-settings-feedback
34-program-light
08-A-button-log
35-program-regular
08-B-button-log-feedback
*see last page for figures
36-program-heavy
37-program-my
38-timer-medium
(Figure 5*)
is fully rotated counter-clockwise to the closed position.
03-product-name
09-1-A-button-heater- rst
00 vector graphics: single-icons and screen buttons
09-2-A-button-heater-after-code
09-B-button-heater-feedback
the main screen.
10-A-button-solution-degas
10-B-button-solution-degas-feedback
30-settings
12-A-button-language-measurest
42-log
12-B-button-language-measures-feedback
31-temperature-large
43-information
13-A-button-date-time
32-temperature-medium
13-B-button-date-time-feedback
44-close-lid
33-temperature-small
14-A-button-my-setup
14-B-button-my-setup-feedback
45-lid-is-open
to return to the main screen.
34-program-light
15-A-button-information
46-lid-was-open 15-B-button-information-feedback
35-program-regular
16-A-button-degas
47-repair
16-B-button-degas-feedback
36-program-heavy
48-software-update
37-program-my
50-A-button-standby
50-B-button-standby-feedback
38-timer-medium
51-statusbar-standby-closed
39-timer-large
52-statusbar-standby-opened
(Figure 6*). Ensure that the water level is
42-log
20-A-button-checked
43-information
20-B-button-checked-feedback
44-close-lid
21-A-button-save
21-B-button-save-feedback
45-lid-is-open
22-A-button-home
46-lid-was-open
22-B-button-home-feedback
47-repair
23-A-button-back
48-software-update
23-B-button-back-feedback
CB
M 1:1
20.10.2016
50-A-button-standby
24-A-button-download
50-B-button-standby-feedback
24-B-button-download-feedback
51-statusbar-standby-closed
25-A-button-play
52-statusbar-standby-opened
25-B-button-play-feedback
60-attention
to degas. 20-A-button-checked
20-B-button-checked-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
9
25-A-button-play
25-B-button-play-feedback
26-A-button-pause