Coltene BioSonic UC150 Benutzerhandbuch Seite 8

• Opening the drain valve will allow you to empty the solution into a waste storage container for
disposal in accordance with your local, state and/or federal regulations.
WARNING!
(Failure to
comply may
/ measures
result in
personnel injury
and/or
equipment
damage.)
Power up Settings:
SET LANGUAGE / MEASURES
English
e
Español
Deutsch
Italiano
Français
Figure 2 Setup Screen: Language and Measures
12.02.2016
SET DATE / TIME
04
05
06
07
00 vector graphics: logo and buttons
08
09
10
DD.MM.YYYY
Figure 3 Setup Screen: Date and Time
• SETUP COMPLETE. The display will now show the main screen once setup is completed in the
language of your choice. Your BioSonic UC150 is now setup and ready to use!
NOTE: If modifications need to be made to the setup of the unit, go to settings menu by pressing
to change the setup options.
8
Power should not be supplied to the unit until all interconnections between
the display and tank enclosure and any accessories are securely connected.
This unit must be properly grounded. Failure to properly ground unit may
result in serious injury.
°C
10:21 40°C
NOV 2013 08 59
DEC 2014 09 00
JAN 2015 10 01
2016
FEB 11 02
MAR 2017 12 03
APR 2018 01 04
MAY 2019 02 05
01-logo-loading
MM.DD.YY YYYY.MM.DD 12Hr
02-logo-information
04-A-button-program-light
04-B-button-program-light-feedback
05-A-button-program-regular
05-B-button-program-regular-feedback
06-A-button-program-heavy
06-B-button-program-heavy-feedback
07-A-button-program-my
07-B-button-program-my-feedback
11-A-button-settings
11-B-button-settings-feedback
08-A-button-log
08-B-button-log-feedback
00 vector graphics: single-icons and screen buttons
• SELECT A LANGUAGE AND TEMPERATURE
UNIT: Select the language for your appropriate
30-settings
region from the drop down list. Press
button to accept.
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
°F
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
00 vector graphics: single-icons and screen buttons
• SET THE DATE AND TIME: Set the date and
39-timer-large
time with the preferred format by using the
40-solution
30-settings
drop down list and format buttons. Press
41-degas
to accept. User can choose one of the three
31-temperature-large
date formats:
AM
32-temperature-medium hot surface
PM
33-temperature-small
03-product-name
34-program-light
24Hr
09-1-A-button-heater- rst
35-program-regular
09-2-A-button-heater-after-code
09-B-button-heater-feedback
36-program-heavy
10-A-button-solution-degas
10-B-button-solution-degas-feedback
37-program-my
12-A-button-language-measurest
12-B-button-language-measures-feedback
38-timer-medium
13-A-button-date-time
39-timer-large
13-B-button-date-time-feedback
14-A-button-my-setup 40-solution
14-B-button-my-setup-feedback
41-degas
15-A-button-information
15-B-button-information-feedback
hot surface
16-A-button-degas
16-B-button-degas-feedback
M 1:1
20.10.2016
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
42-log
43-information 62-A-button-ok
62-B-button-ok-feedback
44-close-lid
warning/caution
45-lid-is-open
- DD.MM.YY
- MM/DD/YY
46-lid-was-open
- YY-MM-DD
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
warning/caution
CB
20-A-but
20-B-butt
21-A-but
21-B-butt
22-A-but
22-B-butt
23-A-but
23-B-butt
24-A-but
24-B-butt
25-A-but
25-B-butt
26-A-but
26-B-butt
20-A-but
20-B-butt
CB
21-A-but
M 1:1
21-B-butt
25.10.2016
22-A-but
22-B-butt
23-A-but
23-B-butt
24-A-but
24-B-butt
25-A-but
25-B-butt
26-A-but
26-B-butt
CB
M 1:1
25.10.2016