Replacement Of Indicators And Rear Light - Beta Motorcycles ALP 4.0 Bedienungsanleitung

5
REPLACEMENT OF INDICATORS AND
REAR LIGHT
A
The indicators and rear lights have a light
LED. In the event of a breakdown, replace
the whole indicator as follows:
FRONT INDICATORS
Unscrew the nut A inside the cover, which
matches the damaged indicator.
Pull out the light unit and disconnect it from
the electric wire.
Connect the new indicator, fit it back onto
its rest.
Screw the nut A.
REAR INDICATORS
Unscrew the nut B under the rear fender,
which matches the damaged indicator.
Pull out the light unit and disconnect it from
B
the electric wire.
Connect the new indicator, fit it back onto
its rest.
Screw the nut B.
C
Rear light
Unscrew the two screws C and remove
the rear light D.
Disconnect the light wire by removing the
back tail and back handles as described
on page 49.
D
GB
67