Final Transmission Group Substitution - Beta Motorcycles ALP 4.0 Bedienungsanleitung

3
GB
FINAL TRANSMISSION GROUP SUBSTI-
TUTION
In case one of the three final transmission
components must be substituted because of
wear (pinion, chain and crown), it is rec-
ommended to substitute the entire group.
Substituting the chain
• Use a screwdriver as shown in the figure.
• Remove the catch B on the links A, after
having located it and positioned it on the
crown.
• Remove the link and take the chain out
Note:
During reassembly proceed in the inverse
order, being careful to position the OR cor-
rectly. The safety catch must be assembled
in the opposite direction of the tire rotation
(see figure).
52