Replacing The Rear Brake Pads - Beta Motorcycles ALP 4.0 Bedienungsanleitung

REPLACING THE REAR BRAKE PADS

The procedure for replacing the brake
pads is provided only for information.
We recommend having the operation
performed by a BETAMOTOR authorized
workshop.
Follow these steps to replace the pads:
• Position the motor-bike on a central stand,
with the rear tire raised above the ground.
• Loosen the right and left register A and
remove the tire axis B.
• Take out the brake pincer complete with
plate.
• Take out the worn brake linings and
substitute them with new ones, having
the same typology.
• For reassembling proceed in the inverse
manner previously described.
• It is necessary to be sure that the tablets
have been correctly placed, after having
assembled pincer and tire support, using
the brake lever to close the pincer's pi-
ston, in order to quickly verify the exact
assembly.
65
5
GB