Starting The Engine - Beta Motorcycles ALP 4.0 Bedienungsanleitung

2
GB

STARTING THE ENGINE

• Rotate the ignition key clockwise and
ensure that the neutral warning light (N)
on the instrument panel is lit.
IMPORTANT:
Remember, before turning the key, to po-
A
sition the light- switch knob in headlight
position (see page 13), so as to reduce
battery consumption as much as possible.
• Set the emergency switch on the throttle
control to the (o) position.
• Turn fuel cock A:
OFF = closed
ON = open
• Pull out starting device knob B, located
on the left side of the carburetor, until it
stops.
Vehicles with electric start only
• Pull the clutch lever while pushing the
start button on the throttle control without
rotating the throttle twist grip.
Vehicles with kick-start (optional)
• Push down the kick-start sharply with the
foot and then fold back the lever.
• Wait for about 2 minutes to warm up the
engine without rotating the throttle twist
grip, and then push down starting device
B, initially to the first step, and then to the
second.
30