B) Enabling The Changeover Contact Via Push Button; C) Using The Bell Function - Sygonix 1717531 Bedienungsanleitung

b) Enabling the changeover contact via push button

If a button has been connected between connections 1 and 5, the changeover contact can be
enabled by briefly pressing the button. The activation time corresponds to that used for the user
code and/or transponder (for programming, see chapter 9. k).
If a door opener is triggered via the changeover contact, the door opener can be enabled with
the button without the need for a user code and/or transponder.

c) Using the bell function

With the bell function on (see chapter 9. m), press the
For this purpose, a small speaker must be connected to connection 10 + 11 as de-
scribed in chapter 6.
50
button to enable a speaker.