Sygonix 1717531 Bedienungsanleitung Seite 35

Warning!
Never switch the mains voltage via the potential-free changeover contact! There is a
risk of fatal electric shock! Observe the permissible contact rating; see chapter "Tech-
nical data".
Use suitable cables with different colours. Note the colours down and store this infor-
mation together with these instructions.
When connecting the power supply cables, pay attention to the correct polarity (plus/+
and minus/-).
• Make sure the cables behind the code lock are properly protected against moisture (e.g. near
the hole through a wall).
• Attach the code lock to the mounting plate. Ensure that the cables are not pinched.
• The code lock can be fixed on the mounting plate using the fixing screw on the underside.
35