Switch Lighting On / Off; Set Time; Service Menu - Truma VarioHeat Series Einbauanweisung

Switch lighting on / off

Available when air conditioning system is connected
Aventa comfort or
Aventa eco
– Select icon in menu bar (4) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select required function with rotary push button.
1 – 5 – Switch lighting on.
Brightness selectable in 5 levels.
OFF – Switch lighting off.
– Tap the rotary push button to confirm the value.
4
Figure 18

Set time

Display, 24 h mode
4
Figure 19
– With the rotary push button (8), select the "Set time" sym-
bol in the menu bar (4).
The hour display flashes.
– Set the hours with rotary push button (8).
– The minutes display flashes when the rotary push button (8)
is tapped again.
– Set the minutes with rotary push button (8).
– Tap the rotary push button (8) to confirm the value.

Service menu

1. Calibrating the room temperature sensor of the
heater (OFFSET)
The room temperature sensor of the heater can be individually
adjusted to the sensor's installation situation. The setting can be
made in increments of 0.5 °C within the range of 5 °C to -5 °C.
Example:
Set room temperature 23 °C;
OFFSET = -1 °C;
– Setpoint value for heater = 22 °C
Figure 21
Presetting: 0 °C (Celsius).
Display, 12 h mode
4
= a. m.
= p. m.
Figure 20
2. °C / °F temperature display
Select the temperature display °C (Celsius) or °F (Fahrenheit).
Figure 22
Presetting: °C (Celsius).
3. Changing the background lighting
Change the background lighting of the Truma CP plus VarioHeat
control panel in 10 increments.
Figure 23
4. 12 h / 24 h mode
Display time in 12 h (a. m., p. m.) / 24 h mode.
Figure 24
Presetting: 24 h mode.
5. Change language
Select the desired language (German, English, French, Italian).
Figure 25
Presetting: English
6. Showing the version number
Display the version number of the heater, air conditioning sys-
tem, Truma CP plus VarioHeat control panel.
Example:
H 1.20.01 –> H = Appliance; 1.20.01
= Version number
Appliance
P = Truma CP plus VarioHeat control
A = Air conditioning system
H = Heater
Figure 26
panel
23