CLIVET ELFORoom2 3 Anleitung Zur Installation Und Wartung Seite 72

6.3 ON/OFF KEYPAD WITH WARNING LED
Siganal Led
On steady Machine connected to the network and operating properly
Off fan-coil off or disconnected from the power supply; if the fan-coil is off, when the remote control is turned
back on the fan-coil turns on again.
flashes once + pause (Hot or cold) water request not met. This means the fan is stopped until the water temperature reaches a
value that is suitable to meet the request.
flashes twice + pause Communication error. The control involves a continuous exchange of information on the RS485 serial line
with remote control. If this is not provided for more than 5 minutes, the error is displayed and the ventilation
radiator/fan-coil is disabled.
flashes three + pause Blocked as the water is not suitable, unlocked automatically after 45 minutes or manually by pressing the
ON stand-by key twice.
flashes four + pause Water probe malfunction, all the outputs are turned off until the problem is solved.
flashes five+ pause The warning is associated with a fan motor problem (for instance a jam due to foreign bodies, a rotation
sensor failure, activation of the protective micro switch due to the fact that the filter is being cleaned).
6 - CONTROL
It allows to activate the appliance or to put it in
stand-by (press and hold for 2 sec.)
Reports the appliance is operating. Flashes if
there are any faults.
72