Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMBICONTROL
5.3
Parameters of the PROFIBUS interface
The parameters serve for the configuration of the PROFIBUS interface. The parameters are
addressed via PROFIBUS by means of index (16 bit) and subindex (8 bit).
Name
Meaning
Index
Subindex
Data length
Coding
Default
Note
Name
Meaning
Index
Subindex
Data length
Coding
Fieldbus Comm Axis
Serves for change-over of the PROFIBUS communication between
each devices, which can be addressed by the control.
5FFFh
0
1 Byte
0
The control itself is addressed.
1...8 Axis 1...8 is addressed
0
A changed value is immediately active. After switching on the para-
meter value is always = 0.
Parameter of the respective axis
set-addressing
2000...5FFEh
0
1 Byte
0
indirect set-addressing
1...255 binary coded set-addressing set 0...7
GB - 21
Werbung
Kapitel
Inhaltsverzeichnis
