Description Of The Unit; Application; Construction; Ce-Certifications - KEB PCC C5 Betriebsanleitung

COMBICONTROL
1.

Description of the unit

1.1

Application

KEB COMBICONTROL C5 is a programmable control with direct connection upto 8 KEB
frequency inverters/servo axes of the series F5. The connection to the axes is created as
HSP5/485. All axes can be operated directly and synchronously with an inexpensive operator
with this fast, reliable connection. Cycle times down to one millisecond are realizable. This
manual describes the release of the firmware V1.3 and higher.
The axis control is programmed with the uniform IEC 61131-3 programming system CoDeSys
of the 3S-Software Company, Kempten (Germany) (www.3s-software.com).
1.2

Construction

The control consists of four modules:
• Basic module with
• CPU and memory
• internal flash file system
• Switching power supply
• Real-time clock
• HSP5/485-interfaces to the inverter/servo axes
• Operating element with
• Ethernet interface
• serial interface
• Control and error LED's
• RUN/Reset switch
• external memory card file system
• Input/output interface contains
• Voltage supply connection
• 8DI/8DO input module with
• Field bus interface (optional)
• ProfiBus-DP interface
1.3 CE-certifications
This unit was tested in accordance with the generic standard EN 61000-6-2 in the range of noise
immunity and corresponds to the EMC directive 89/336/EWG with changes/extensions.
1.4 Unit identification
Default
Enhanced 1
GB - 4
• eight digital inputs
• eight digital outputs
Material number
09C5B00-1000
09C5B30-1000
19C5B00-1000
19C5B30-1000
Description
8DI/8DO
Profibus-DP and 8DI/8DO
8DI/8DO
Profibus-DP and 8DI/8DO