Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMBICONTROL
ud.06
error counters tx
This parameter counts the errors during the transmission to each individual axis. Set 0
displays the errors of axis 1, set 1 of axis 2 etc.
ud.07
fieldbus comm axis
This parameter displays the axis, on which the field bus accesses to by parameter com-
munication.
ud.08
user r/w password
Parameters with write/read password level can be changed with the password input of
this parameter. The standard value is 440. This parameter can only be read/changed with
a special password.
ud.09
indirect set indicator
Display and adjustment of the set indicator for indirect parameter access.
ud.10
active set
Display and adjustment of the active set.
ud.11
serial number (date)
Displays the date of the unit serial No.
ud.12
serial number (counter)
Display of the unit serial No.
ud.13
QS number
Only for the internal use during the production of the unit.
6.3.6 System parameter
sy.01
software date
This parameter displays the date of the installed firmware.
sy.02
device identifier
This parameter displays the software-identification number (CFG-ID) for COMBIVIS.
sy.03
target-Id
Displays the CoDeSys identification number of the control.
sy.04
configuration selection
Selection of internal device data.
GB - 28
Address
0806h
Address
0807h
Address
0808h
Address
0809h
Address
080Ah
Address
080Bh
Address
080Ch
Address
080Dh
Address
0001h
Address
0002h
Address
0003h
Address
0004h
Werbung
Kapitel
Inhaltsverzeichnis
