Accessories; Ce Declaration; Warranty; Cleaning Head - Kärcher HKF 200 Originalbetriebsanleitung

Fault
Motor does not turn.
Motor does not turn, clean-
ing head does not turn
Cleaning head turns too
abruptly
Uneven cleaning jet

Accessories

Description
Maintenance unit for com-
pressed air (only for com-
pressed air drive)
Compressed air filter with
automatic condensate
drain (only for compressed
air drive)
Bow (stainless steel) for
HKF 200 P, HKF 200 PT
Bow (stainless steel) for
HKF 200 E, HKF 200 ET,
HKF 200 C, HKF 200 C2
Horizontal rack (stainless
steel), diameter 560 mm
High pressure hose
NW 13 - 1.5 m
*1)
High pressure hose
NW 13 -10 m
*1)
Kupplung NW 13
*
90° screwed coupling
NW 13
*
Compressed air hose
(sold by the meter)
Exhaust air silencer with
oil separator
Possible for max. 4,000 l/h flow of cleaning
*
liquid. With higher flow volumes of cleaning
liquids, please consult Kärcher.
The hoses for solvent operation must be
1)
electrostatically conductive!
34
English
Possible cause
There is no voltage at the motor.
Protective motor switch was trig-
gered.
Error current protective switch
was triggered.
No compressed air present or
pressure too low.
Compressed air supply line
kinked.
Mechanical defect on:
– Coupling parts
– Drive shaft
– Gears
Worn drive discs cause increased
bevel play.
Destroyed gears on bevel wheels. Replace bevel wheels.
Spray nozzles clogged.
Spray nozzles damaged.
We hereby declare that the machine de-
scribed below complies with the relevant
Order No.
basic safety and health requirements of the
6.610-020
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
6.414-154
without our prior approval.
Product:
Type:
Relevant EU Directives
4.034-016
98/37/EC (to 28.12.2009)
2006/42/EC (from 29.12.2009)
94/9/EC
4.034-126
Applied harmonized standards
EN ISO 12100–1
EN ISO 12100–2
EN 1127-1: 1997
4.210-022
EN 13463-1: 2002
EN 13463-5: 2003
HKF 200 E, HKF 200 ET, HKF 200 C, HKF
6.389-126
200 C2:
EN 60204–1
4.440-173
Applied national standards
-
ID no. of notified body
4.403-002
0123
TÜV SÜD
4.408-023
Ridlerstr. 65
80339 München
6.388-192
Test report no.
Ex5 0307 10088 097
Marking
on request
II 1/2 G c T4
II 1/3 D c 120°C
5.957-454
5.957-735
Troubleshooting
Remedy
Check fuses and cables.
Fix cause for overload, reset motor protection
switch.
Remove cause and reset error current protec-
tive switch.
Check compressed air supply.
Check compressed air hoses.
Check parts and replace defective parts.
Replace drive discs.
Clean spray nozzles.
Replace spray nozzles.

CE declaration

Internal cleaner
HKF 200
of whom
Electricians
Electricians
Electricians
Operator
Operator
Customer Service
Customer Service
Customer Service
Operator
Operator
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
CEO Head of Approbation
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
In the event of a warranty claim please con-
tact your dealer or the nearest authorized
Customer Service centre. Please submit
the appliance, including all accessories,
and the proof of purchase.