Rear Axle Measurement And Adjustment Screen - Nussbaum WA 780 Betriebsanleitung

REAR AXLE
MEASUREMENT
AND ADJUSTMENT
SCREEN
Displays the measured angles for the vehi-
cle rear axle and the adjustment reference
tolerances (Fig.28).
The values are continually updated to guide
the operator performing the adjustment.
The following keys are active in this screen:
F1 displays the on-line "Help"
function
F2
goes back to the previous
screen
F3 (or Enter) goes to the next
screen
F11 displays the menu with the
relative functions.
User Manual WA 780 - Cura S 780
These are the menu options:
• End of work (goes back to the starting
screen)
• Other page (displays the set back and
the track difference instead of the camber
values and vice versa)
• Levels (displays/hides the status of the
target levels on the screen)
• Databank data summary (recalls the
screen that displays the vehicle nominal
values)
• Summary data (displays the vehicle data
summary screen)
• Vehicle adjustments (opens the screen
for selecting/displaying the adjustment
images of the vehicle angles)
• Adjustment with car lifted / End of the
adjustment with car lifted(accesses/exits
the vehicle registration procedure, with
the wheels lifted)
• Set-up (opens contextual set-up in the
28
current screen)
• Operating sequence (recalls the align-
ment execution setting screen, according
to the user's preferences)
• Help (recalls the Help screen relative to
the current screen).
Remarks
• The numeric values are colour-coded as
follows:
- Red background: value outside the
permitted tolerance range;
- Green Background: value within the
permitted tolerance range;
- Blue background: value with no associ-
ated reference tolerance values.
Below the adjustment values there are
graduated animated bars that respond to
the progress in the adjustment procedure
by changing their colour, with the same
principle mentioned above.
GB
95