The Best Way Of Brewing Your Coffee; Making The Espresso Machine Ready For Operation - Gastroback DESIGN ESPRESSO PRO Bedienungsanleitung

6. Repeat steps 3 to 5 until the water tank is empty. In between times, do not forget
to empty the vessel (drip tray) in time. While doing this, keep in mind that the
vessel and its contents may be very hot.
7. Refill the water tank and, if required, empty the drip tray. The appliance is now
ready for making your espressi.

THE BEST WAY OF BREWING YOUR COFFEE

WARNING – RISK OF BURNS!
and hot water could escape from the group head and/or hot water / steam wand.
Do not hold your hands or any delicate object near the group head or hot water /
steam wand. Hot steam and hot water under pressure could escape even shortly after
Young children must always be supervised when the espresso machine is in
shut-off.
their reach.
Empty the drip tray at the latest when the red filling level indicator is sti-
cking out of the grill of the drip tray.
backflush system of the appliance will give off surplus water for releasing the pressu-
re within the water system.
before removing the drip tray.
Note:
During operation and in standby mode, the POWER button may flash occasional-
ly, indicating that the espresso machine keeps the correct temperature of the group
head. For brewing a shot of espresso, you should wait, until the POWER button is
illuminated continuously to ensure that the group head has reached the appropriate
temperature for brewing.
Note:
We recommend to use clear tap water or a low-mineral table water with the appli-
ance. Do not use highly filtered water or mineral water.
Remove the drip tray with caution, when it is filled, to avoid spilling the contents. For
this. lift the drip tray a little at the front side, then slowly pull it out.

MAKING THE ESPRESSO MACHINE READY FOR OPERATION

1. Ensure that the water tank is filled sufficiently (filling level between MIN and MAX)
and assembled correctly. Check it the drip tray is empty and installed correctly in
the base of the appliance.
2. Connect the appliance to the power supply and press the POWER button to
62
During operation and thereafter, hot steam
After the last operation of the appliance, the
Press the POWER button to switch off the appliance