Herunterladen Inhalt Inhalt Diese Seite drucken

First Use; Purging The Water System - Gastroback DESIGN ESPRESSO PRO Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DESIGN ESPRESSO PRO:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

FIRST USE

Note:
We do not recommend to use highly filtered, de-mineralized or distilled water as
this may affect the taste of the coffee and how the espresso machine is designed
to work. Use clear tap water or low-mineral table water.
1. Check the filling level in the water tank. The filling level must lie between the MIN
(100 ml) and MAX filling lines (1.5 litres). If required, fill the water tank. Open
the water tank lid (pull it up and then fold it back) and pour the water into the
water tank. Alternatively, remove the water tank from the back of the appliance
by simply pulling the water tank out by the lid. Then fill the water tank via the
water tap. For reassembling the water tank, slide the water tank down at the rear
of the espresso machine until it settles in the support. With the lid closed, the lid
of the water tank may not protrude the frame of the housing. Ensure that the drip
tray is empty and inserted correctly into the base of the appliance. Ensure that
the selection dial is in the vertical position (OFF).
2. Connect the espresso machine to a suitable power outlet (see: 'Important Safe-
guards for Electrical Appliances'). Press the POWER button to turn the appliance
on.
Note:
The POWER button will flash to indicate that the espresso machine is heating. After
approx. 2 minutes, the group head will reach the operating temperature and the
POWER button will be illuminated continuously. The appliance is now in standby
mode, and ready for the next step.
3. Before first use, you should operate the appliance without coffee powder to pur-
ge the water system, group head, and hot water / steam wand. Refer to the
following section 'Purging the Water System'.

PURGING THE WATER SYSTEM

WARNING – RISK OF BURNS!
delicate object under or near the group head or hot water / steam wand, while the
appliance is in operation. Hot water and steam can escape and cause severe inju-
ries and damage. Before selecting a function via the selection dial, always ensure
that the drip tray is installed correctly and the hot water / steam wand is pointed to
the drip tray or, what's better, any suitable vessel to avoid scalds and damage.
60
Do not hold your hands and arms or any

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis