Connecting The Receiver; Connecting The Headset - Auerswald COMfortel 3500 Inbetriebnahmeanweisungen

Preparation

Connecting the Receiver

Steps to Take
1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the jack labelled with
2.
Guide the cable to the outside using the corresponding cable channel (see
Fig.
3.
Insert the other RJ-10 connector of the spiral cord into the jack on the re-
ceiver.
Fig. 9: Connecting the receiver

Connecting the Headset

Requirements
– A headset corresponding to technical data listed on
Note: The telephone supports the operation of cable-connected headsets
as well as cordless headsets (headsets with a DHSG interface, for exam-
ple, from Auerswald, Jabra, or Plantronics).
46
9).
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
on the lower side of the telephone.
Page 11.