Encoder-Profil Klasse 2; Ddlm_Data_Exchange Funktion Slave->Master; Ddlm_Chk_Cfg Configuration Function; Ddlm_Data_Exchange Funktion Master->Slave - SICK DME 3000-2 Betriebsanleitung

DME 3000-2 _ _P
Software 1.1

10.2 Encoder-Profil Klasse 2

Die in Klasse 1 bereits beschriebenen Parameter sind hier nicht nochmal erläutert.
10.2.1 DDLM_Data_Exchange Funktion Slave->Master
Octet Bit Type
1...4 signed long (1 = MSB)

10.2.2 DDLM_Chk_Cfg Configuration function

Octet Bit Type
1
0...3 unsigned 4
4...5 unsigned 2
6 unsigned 1
7 unsigned 1
10.2.3 DDLM_Data_Exchange Funktion Master->Slave
Daten sind Preset-Daten, MSB von Octet 1 bestimmt, ob Daten übernommen werden
Octet Bit Type
1...4 signed long

10.2.4 DDLM_Set_Prm Operating Parameters

Octet Bit Type
9 0 bool
1 bool
2 bool
3 bool
4 bool
5 bool
6 bool
7 bool
10...13 unsigned 32
14...17 unsigned 32
18...25
26 0 bool
1 bool
2 bool
3 bool
4 bool
5 bool
6 bool
7 bool
27 0...3 unsigned 4
4...7 unsigned 4
28...31 signed 32
32...35 signed 32
36...39 signed 32
40 unsigned 8
41 unsigned 8
42...43 unsigned 16
44...46 unsigned 32
Output
Positionsdaten vom Encoder
Output Class 2
32 bit
F1 hex
length code 01
Input data 11
Word format 1
Consistency 1
Output
Preset-Value
Normal Mode: MSB = 0 (bit 31)
Preset Mode: MSB = 1 (bit 31)
(MSB optional bit 15)
Output
Code Sequenz (CW/XCW)
Class 2 Functionality (on/off)
Commissioning diag. (on/off), optional
Scaling function control
Reserved for future use
Reserved for future use
Reserved for manufacturer
Reserved for manufacturer
Measuring units per revolution
Total measuring range
Reserved for future use
Reserved
Reserved
IN1 (Q1,/Q1)
IN2 (Q2,/Q2)
Write Parameter to EEPROM;ON/OFF
Reserved
Reserved
Reserved
Averaging / Plausibility
Response Time
Display Offset
Limit Switching Output 1
Limit Switching Output 2
Hysteresis Switching Output 1
Hysteresis Switching Output 1
Diagnostic Intervall x 100 ms
RS422 Activation
Seite 23