O) Switching The Date Display Format; P) Setting Time & Date Manually - Conrad TE635EL Bedienungsanleitung

o) Switching the date display format

When displaying the date, you can choose between the day/month display and the month/day
display.
• If a time zone is shown ("ZONE" displayed above time), change to the normal time display
(e.g. 12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language
appears on the top right of the display instead of the running second. Release the button
again.
• Briefly press the "MODE" button several times until the date is shown on the top of the
display with a flashing "D" and a flashing "M".
• You can select the desired display format with the " " and " " buttons on the front of the
weather station.
• Now press the "MODE" button (only press button briefly each time) so often until the normal
time display reappears (and no setting option flashes anymore).
p) Setting time & date manually
If no DCF reception is possible at the installation site, you can set the time and date manually.
• First of all, switch off the DCF reception, see Chapter 12. i).
• If a time zone is shown ("ZONE" displayed above time), change to the normal time display
(e.g. 12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language
appears on the top right of the display instead of the running second. Release the button
again.
• You can select the desired language with the " " and " " buttons on the front of the
weather station.
DE = German
FR = French
IT = Italian
SP = Spanish
EN = English
76