Conrad TE635EL Bedienungsanleitung Seite 60

• Select one of the three transmission channels (1, 2
or 3) with the "CHANNEL" sliding switch located
above the battery compartment. If only one outdoor
sensor is used, this setting is irrelevant.
The weather station will later only show dashes for
the non-existing sensors on the respective display
field of the LC display for outdoor temperature and
outdoor air humidity.
It is imperative that you set the transmission channel
before inserting the batteries. If not, the switching to
another channel will not be recognised.
• Once the transmission channel has been selected,
insert two batteries of type AA/Mignon with correct
polarity into the battery compartment (pay attention
to positive/+ and negative/-). There is a correspond-
ing illustration in the battery compartment.
As already mentioned, we recommend high-quality
alkaline batteries. Especially when temperatures
are cold outdoors, these batteries offer bigger re-
serves compared to simple zinc carbon batteries or
rechargeable batteries.
• If no display appears, you can carefully and shortly
press the reset button which is countersunk in the
housing, e.g. with a toothpick (do not use any force!).
Check the polarity of the inserted batteries, check
their condition (are the batteries empty?).
Take out the batteries and insert them again, try out
different (new) batteries.
60
CHANNEL
RESET
1 2 3
CHANNEL
RESET
1 2 3
-
+
+
-
CHANNEL
RESET
1 2 3
-
+
°C/°F
°C/°F
°C/°F
+
-