H) Display Rising/Setting Time For Sun/Moon Or Sun Hours - Conrad Profi Bedienungsanleitung

Activate Snooze Function or Terminate Alarm
• The alarm signal is activated at the set alarm time; the symbol „
upper right of the display.
• Pushing the button „SNOOZE/LIGHT" (B1) interrupts the alarm signal for the duration of 5 mi-
nutes. During this time, the symbol „
Then the alarm signal is started again. This procedure can be repeated up to 7 times.
• To terminate the alarm signal (or snooze mode), push one of the following buttons: „AL ON/
OFF" (B2), „MODE" (B3), „SUN/MOON" (B4), „8 (12/24)" (B11) or „2/
The alarm signal is automatically terminated after 2 minutes if none of the above buttons in
pushed.

h) Display Rising/Setting Time for Sun/Moon or Sun Hours

For the right rising/setting time of the sun/moon and the associated sun hours to be
calculated, the country and city have to be set; see chapter 10. c).
• Briefly push the „SUN/MOON" (B4) button to switch between display of the rising/setting time
and display of the sun hours.
• If the moon will not appear on a day, the rising/setting time for the moon will be replaced by
dashes on the display.
" or „ " continues to flash (snooze mode is active).
" or „ " also flashes in the
" (B12).
59