Auto Accessing Active Computers (Autoskip) - Guntermann & Drunck DVIMUX8-OSD-PS/2 Installationsanleitung

How to start the Autoscan process:
1. Press Ctrl+Num (Standard) to open the On-Screen Display.
2. Press to open the menu.
F1
3. Use the
Arrow keys
How to stop the Autoscan process:
1. Press Ctrl+Num (standard) to open the On-Screen Display or use a key combina-
tion to switch the channel.

Auto accessing active computers (Autoskip)

The Autoskip function accesses any active computer in sequence.
After each switching, an information display at the moni-
tor shows the name of the active computer, the name of
the KVM switch and the information
NOTE: If the Autoskip function is enabled, your keyboard and mouse inputs are
transmitted to the active computer.
During your inputs, the Autoskip function pauses and continues after you finish
your inputs.
NOTE: In the default settings of the KVM switch, the Autoscan function accesses all
connected computers.
You can change this setting as described in the paragraph Selecting computers to per-
form advanced switching functions on page 30.
How to start the Autoskip process:
1. Press Ctrl+Num (Standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the
Arrow keys
How to stop the Autoskip process:
1. Press (standard) to open the On-Screen Display or use a key combina-
Ctrl+Num
tion to switch the channel.
to choose , and press
Autoscan
.
SKIP
to choose , and press
Autoskip
Getting started
.
Enter
CPU 1
DVIMUX8
SKIP
.
Enter
G&D DVIMUX8-OSD-PS/2 · 14