Configuration Settings; Delay Until The First »Power Out« Socket Is Active; Delay Until Further »Power Out« Sockets Are Active - Guntermann & Drunck MultiPower-12 Installationsanleitung

Setup menu

Configuration settings

Delay until the first »Power Out« socket is active
After you turn on the central power supply, the first
delay of 0.7 seconds (
You can decrease or increase the delay by entering values between 0.0 and 10.0 sec-
onds (standard: 0.7 seconds).
How to adjust the delay until the first »Power Out« socket is active:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press R within the terminal emulator.
4. Use the Arrow
5. Use the Arrow
6. Press to save your settings.
S
Delay until further »Power Out« sockets are active
Following the first
delay of 0.1 seconds.
You can decrease or increase the delay by entering values between 0.0 and 2.0 sec-
onds (standard: 0.1 seconds).
How to adjust the delay until further sockets are enabled:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press within the terminal emulator.
R
4. Use the
Arrow
5. Use the
Arrow
6. Press to save your settings.
S
7 · MultiPower-12
Power Start Delay
or Arrow keys to select
or Arrow keys to decrease or increase the adjusted value.
socket,all other sockets become successively active with a
Power Out
or keys to select
Arrow
or keys to decrease or increase the adjusted value.
Arrow
Power Out
).
Power Start Delay
Power Channel Delay
becomes active after a
.
.