Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configuring the matrix switch
The matrix switch can either be configured in the on-screen display at the user mod-
ules or by using the graphical user interface of the Config Panel web application.
Initial configuration of the network settings
NOTE:
A basic requirement to access the Config Panel web application and apply
enhanced network functions is to use the on-screen display (OSD) of the matrix
switch to configure the network settings of the matrix switch.
Configuring the network interfaces
A matrix switch that is integrated into the network can only be accessed after the
network interfaces have been configured.
IMPORTANT:
By default, the
interface.
How to configure the settings of a network interface:
1. After the console has been turned on, the matrix switch asks the user to log in to
the system.
NOTE:
Use the administrator account to log in to the system for the first time.
These are the default access data for the administrator account:
Username:
Admin
Password:
4658
IMPORTANT:
Follow the descriptions in the separate user manual to change the
password by using the
2. Enter the following data to the login box:
Username:
Enter your username
Password:
Enter the password for your user account.
3. Press
Enter
to log in to the system and open the on-screen display.
4. Press
F11
to call the
5. Select the
row and press
Network
Matrix switch
IP address is assigned to the
192.168.0.1
Change password
menu item of the Personal Profile menu.
Configuration
menu.
.
Enter
»
Configuring the matrix switch
Network A
G&D CompactCenter X2 · 7
Werbung
Kapitel
Inhaltsverzeichnis
