Sony LZ51-B Bedienungsanleitung Seite 96

• Setting the sign bit logic (Continued from P.92.)
3. Select "SGN" and press
Selects the sign bit logic.
The initial value is negative logic ("High" when
negative).
The selected item flashes.
"POS" : Positive logic
"NEG" : Negative logic
4. Select the desired item with the cursor movement
keys .
5. Select the desired logic and press
Enters the sign bit output logic.
(In this case, positive logic (POS).)
The setting contents light steadily for approximately
2 seconds for confirmation.
94
.
ENTER
.
ENTER
Main display
Sub-display
Main display
Sub-display
(Lights)
↓ (After approx. 2 sec.)
Main display
Sub-display