Sony LZ51-B Bedienungsanleitung Seite 74

Connector pin arrangement
(as seen on the rear panel of the display unit)
18 17 16
36 35 34
• Connector to be procured
Use the equivalent of 57-30360 micro
ribbon connector manufactured by Daiichi
Denshi Kogyo Co., Ltd. (DDK)
Note The least significant digit (rightmost digit) displayed on the display unit is the 1st digit.
2. Interface cables
Use a shielded interface cable as shown in the figure right
for connection to the BCD connector.
Connect the 0 V and G2 cables separately from the
shielded cable. (Please procure the shielded connection
cable.)
Failure to use a shielded cable may result in misoperation
due to noise, etc.
72
15 14 13 12 11 10 9 8 7 6 5 4 3
33 32 31 30 29 28 27 26 25 24 23 22 21
Digits displayed on the display unit
2 1
20 19
Sectional diagram of interface cable
7th digit 1st digit
Digital display
Outer cover
Knitted shield