Specifications - Sony LZ51-B Bedienungsanleitung

7. SPECIFICATIONS

Item
BCD output
Output logic
Electrical
specifications
Power-on status
(status when initial
settings are
displayed)
Alarm output data
(except during
power-on)
Output data
122
7 digit parallel data (4 bits x 7 digits), sign (1 bit), READY signal (1 bit)
Positive and negative logic can be selected individually for the data, sign and READY signal by the initial
settings.
Synchronous type open collector output
Output IC: SN75468NS (Darlington transistor arrays)
+5 V can be output using a jumper on the board.
Output connector: 36-pin micro ribbon connector
Selectable from data output or alarm status (all "OFF") by the initial settings.
Selectable from the data before the alarm occurred or all "OFF" by the initial settings.
Current (1st axis, 2nd axis, addition/subtraction axis), maximum, minimum and peak-to-peak values
Contents
V : Recommended DC +5 to 24 V, Maximum DC 48 V
CE
Ic: Max. 30 mA/terminal, TOTAL: 300 mA