7. Select the data you wish to output and press
Enters the output data when DRQ1 is input.
(In this case, the 2nd axis value is output.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
3. Press
RESET
or select "End" and press
Interrupts the BCD output request data settings.
(Previous setting contents remain.)
.
ENTER
.
ENTER
Main display
Sub-display
(Lights)
↓ (After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
91