Balluff BTL5-T110 Technische Beschreibung Seite 82

BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
6 Startup (cont.)
In Fig. 6-14 check the box
➥ ➥ ➥ ➥ ➥
"Synchronize DP slave to constant
DP bus cycle time".
Select the desired times for T
T . Note the minimum and
O
maximum values as well as the
rules from Section 3.2 and 7.1.2.
Once all slaves have been
configured and parameterized, the
constant time for the bus system
should be checked again and
adjusted if necessary.
You are shown an overview of the
clock-synchronous setting by
selecting the menu item Edit / Iso-
chrone Mode Fig. 6-15
➥ ➥ ➥ ➥ ➥
and
I
Fig. 6-14: Clock synchronization (slave properties)
Fig. 6-15: Selecting over view of clock synchronicity
35
english