Balluff BTL5-T110 Technische Beschreibung Seite 66

BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
6 Startup (cont.)
The BTL is parameterized on the
'Parameter Assignment' tab.
➥ ➥ ➥ ➥ ➥ Fig. 6-5
Depending on the module selected
the number of parameters shown
will vary. The default is for a BTL
resolution of 1 µm per LSB and the
maximum measuring length in µm.
The velocity resolution is preset to
0.1 mm/s.
In the subfolder Hex Parameter
Assignment you can see the
parameter data in hex format. This
function is normally not needed
however and serves only as a
direct comparison of the
parameter data with those shown
in the parameter tables in this
manual.
➥ ➥ ➥ ➥ ➥ Fig. 6-6
Fig. 6-5: Parameter Assignment tab
Fig. 6-6: Hexadecimal representation of the parameter data
19
english