Balluff BTL5-T110 Technische Beschreibung Seite 74

BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
6 Startup (cont.)
Error
Meaning
number
0x00 Non-allowed parameter
0x01 Parameter value cannot be changed
0x02 Upper or lower limit exceeded
0x03 Incorrect subindex
0x04 No array
0x05 Wrong data type
0x07 Description element cannot be changed
0x09 No description data available
0x0B No write authorization
Access not possible due to current operating
0x11
state
0x15 Reply too long
0x16 Non-allowed parameter address
0x17 Invalid format
0x18 Number is values is not consistent
0x65 Memory error
Table 6-13: DP-V1 error numbers
Description
Access to unavailable parameter.
It is not possible to change this parameter.
The parameter to be written lies outside the allowed limits.
Access to a non-existing Sub-Index.
Access with specified Sub-Index to an element without
Sub-Indexes.
The value to be written is not the same data type as the
parameter.
Write access to a description element which cannot be
written to.
Access to an unavailable description (parameter is
available).
Write access to a parameter without the necessary
authorization.
Access temporarily not possible (reason unspecified).
The length of the reply is greater than the max. allowed
length.
Non-allowed value or value which is not supported for this
attribute, number of elements, parameter number of sub-
index.
Write access with wrong data format or format which is
not supported.
Write access: Number of values of the parameter does not
agree with the number of values of the selected parameter.
Saving of the data in the non-volatile memory of the
transducer failed.
27
english