Balluff BTL5-T110 Technische Beschreibung Seite 81

BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
6 Startup (cont.)
Select the "DP profile and click on
the "Options" button. In the
➥ ➥ ➥ ➥ ➥
following dialog box
check the box "Activate constant
bus cycle time" and set the
desired constant DP cycle.
Then double-click on the slave you
wish to assign parameters to and
select the "Clock Synchronization"
tab in
➥ ➥ ➥ ➥ ➥
Fig. 6-13
34
english
Fig. 6-12
Fig. 6-12: Constant DP cycle options
Fig. 6-13: Slave properties