Software Installation; First Steps - Siemens Simatic net CP-5412 Installationsanleitung

4

Software Installation

4.1

First Steps

Preparations for
Software
Installation
Installation from
CD
Installation from
Diskettes
Copying the
Required Product
to Diskettes
Installationsanleitung CP-5412/Windows NT
C79000-B8274-C375-02
To prepare for software installation, follow the steps below:
Read the README.TXT file on the CD.
Read these installation instructions thoroughly.
The product you require is on the CD.
Under Windows 98 and Windows NT, you install the product using the
SETUP.EXE installation program in the main directory of the CD.
If you want to install the product on a computer without a CD drive, you
must copy the product from the CD to diskettes. The product can then
be installed by starting SETUP.EXE on the first diskette.
How to copy the required product from the CD to diskettes is described
below:
Step
1 Open the directory of the product you require on the CD.
This directory contains a directory called DISK1, DISK2 etc.
for each diskette.
Example:
2 Copy the contents of the diskette directories to individual
diskettes.
Installation Instructions CP-5412/Windows NT
Description
\SW\Fms_5412\WinNT\DISK1
51