Siemens Simatic net CP-5412 Installationsanleitung Seite 44

Installation Instructions CP-5412/Windows NT
Warning
Startup
Notes for the Reader
Text Conventions
Registered
Trademarks
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility or design, are
reserved.
© SIEMENS AG 1996 to 1999 All rights reserved
Order No.: C79000-B8274-C375-02
Orders to Gerätewerk Karlsruhe
44
Printed in the Federal Republic of Germany
Prior to startup read the relevant documentation. For ordering data of
the documentation please refer to catalogs or contact your local
SIEMENS representative.
Do not start up until you have established that the machine on which
you intend to run these components complies with the directive
89/392/EEC.
The following symbols are used in the text to draw attention to
important points.
This symbol highlights important features and dangers.
This symbol indicates an activity for you to perform.
Please work through the instructions marked by a check mark in
the order shown.
SIMATIC, SIMATIC NET and SINEC are registered trademarks of
Siemens AG. Third parties using for their own purposes any other
names in this document which refer to trademarks might infringe upon
the rights of the trademark owners.
We have checked the contents of this manual for agreement with
the hardware described. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However, the data
in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcome.
Technical data subject to change.
Siemens Aktiengesellschaft