How To Get Help; Help With Technical Questions - Siemens Simatic net CP-5412 Installationsanleitung

5

How to Get Help

5.1

Help with Technical Questions

Documentation
Who to Contact
Courses and
Further Support
Installationsanleitung CP-5412/Windows NT
C79000-B8274-C375-02
Information about using this product can be found in the following
sources:
• In the corresponding paper documentation
• In the online help (
F1
• In the text and PDF files on the SIMATIC NET CD
• In the following manuals of the S7-400 H programmable controller
Fault-Tolerant Systems
–
Configuring Hardware and Communication Connections with
–
STEP 7 V5.0
Programming with STEP 7 V5.0
–
If you have technical questions about using the software and your
problem is not dealt with in the documentation or in the integrated help
system, please contact your Siemens representative or dealer.
The addresses are listed in the following:
• In our catalog IK 10
• On the Internet (http://www.ad.siemens.de/net)
• In the "README.TXT" file in the main folder of the
SIMATIC NET CD
The H/F Competence Center in Nuremberg offers a special workshop
on the topic of fault-tolerant SIMATIC S7 programmable controllers.
The H/F Competence Center also supports you during configuration,
when putting your system into operation and if you have problems on
site.
For more detailed information, contact:
• Phone:
+49 - 911 - 895 - 4759
• Fax:
+49 - 911 - 895 - 4519
Installation Instructions CP-5412/Windows NT
key)
67