Siemens Simatic net CP-5412 Installationsanleitung Seite 38

Installationsanleitung CP-5412/Windows NT
Aktivieren des
BIOS MEMORY
GAP´s. (ISA-
Memory-Hole,
Memory Hole at
15M-16M)
Auto Configuration
DRAM Timing
DRAM RAS# Precharge Time
DRAM R/W Leadoff Timing
Fast RAS# To CAS# Delay
DRAM Read Burst (EDO/FPM)
DRAM Write Burst Timing
DRAM Speculative Leadoff
Turn-Around Insertion
ISA Clock
Turbo Read Leadoff
System BIOS Cacheable
Video BIOS Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time
Memory Hole At 15M-16M
Peer Concurrency
Chipset Special Features
DRAM ECC PARITY Select
Main Advanced
Advanced System Configuration
ISA Memory Gap:
PCI Bus Parity Checking:
ECC Memory Checking
38
Diese Einstellung muß bei Benutzung der Speicherbereiche
F0....,F4.... und F8.... unbedingt aktiviert (Enabled, Extended) ge-
schaltet sein.
AWARD BIOS:
Memory Hole At 15M-16M auf Enable schalten
Memory Parity/ECC Check
L2 Cache Cacheable Size
Chipset NA# Asserted
ESC
F1
F5
F6
F7
PHOENIX BIOS:
ISA MEMORY GAP auf Extended schalten
Security Power
[Extended]
[Disabled]
[Enabled]
〈 ® 
:Quit
:Help PU/PD/+/-
:Old Values (Shift)F2
:Load BIOS Defaults
:Load Setup Defaults
Exit
Item Specific Help
If enabled, turn system
RAM off to free address
space for use with an
option card.m A 1M
extended memory gap,
starting at 15M,
will be created
in system RAM.
Installationsanleitung CP-5412/Windows NT
:Disable
:64MB
:Enabled
:Select Item
:Modify
:Color
C79000-B8274-C375-02